Home - Brakes - Calipers, Master Cylinders & Proportion Valves - Wilwood GM III Brake Calipers GM LATE MODEL STOCK

Wilwood GM III Brake Calipers GM LATE MODEL STOCK

Wilwood GM III Brake Calipers GM LATE MODEL STOCK
SKU
WIL120-5344
Weight
3.71 lbs
Our price:
$124.90
Click here to be notified of price drops of this item
 
Qty
Quality calipers from a name you can trust.
Wilwood GM III brake calipers are the most rigid, high-torque, lightweight aluminum calipers in their class. They feature a triple-bridge configuration, which provides a tremendous increase in clamping force over twin-bridge calipers. Each caliper model has its own unique casting, and any material that did not contribute to strength was eliminated for weight reduction, which resulted in calipers that weigh just over 3 lbs. The GM III calipers incorporate standard Wilwood features like stainless steel pistons for increased fluid protection, and high-temperature seals for controlled retraction, which improves driver feel.

Wilwood’s GMIII caliper represents the latest refinements in caliper design and manufacturing through solid modeling and stress simulation programs. The result is the most rigid, highest torque, lightweight aluminum caliper with weights starting at 3.36 pounds. Requires use of hardened Wilwood slide pins (sold separately), request part no. 230-0619 (slide pin kit) contains 4 slide pins, enough for two calipers

The real strength comes from its exclusive triple bridge configuration which provides a tremendous increase in clamping force over other twin bridge calipers. Efficient­ designs further maximize weight savings: material is properly placed to fortify all load bearing points. Each caliper model has its own unique casting: 2.38” diameter piston calipers incorporate a smaller external contour than the larger 2.75” diameter piston calipers. Any material that did not contribute to strength, was eliminated for weight reduction.  

The GMIII incorporates standard Wilwood features like stainless steel pistons for increased fluid protection and high temperature seals for controlled retraction which provides improved driver feel. The GM III for 1.00” width rotor is machined and fitted with OEM type slide pin vibration dampeners for a direct OEM caliper interchange.  

These tight grained, high density aircraft alloy aluminum castings are fully machined, assembled and tested in-house by fully trained technicians at Wilwood to assure top quality and peak performance.  

 
Position: Front or rear
Caliper Series: GM III
Piston Diameter (in): 2.38 in.
Caliper Piston Quantity: Single
Rotor Thickness (in): 1.250 in.
Caliper Material: Aluminum
Caliper Finish: Black anodized
Caliper Logo: Wilwood
Parking Brake Provision: No
Fittings Included: No
Fitting Attachment 1: Female threads
Thread Size: 1/8 in. NPT
Brake Pads Included: No
Brackets Included: No
 

Send to friend

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.

Customers also bought

A.N. MALE TO INVERTED FEMALE ADAPTER
$4.14
SPICER JERICO-T10 YOKE-31 SPLINE
$91.23
CTS 1970-1981 Camaro 2 X 2 Front Bumper
$78.99
Engine Heater "Keep It Hot" (Hot Box)
$1499.00
CTS LARGE HEAD EXPLODING 3/16" POP RIVETS
$36.95
KRC Spherical 14mm x 1.5 VW Lug Nut Set
$64.99
CTS Engine Oil Pump Primer Tank
$173.10
 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. 
    

New Racing Parts and Equipment - Dirt and Asphalt Racing