Home - Drivetrain - Axles & Tubes - Strange Oval Modified USTMS Axles

Strange Oval Modified USTMS Axles

Strange Oval Modified USTMS Axles
Strange Oval Modified IMCA USTMS Axles Strange Oval Modified IMCA USTMS Axles Strange Oval Modified IMCA USTMS Axles
SKU
AGY11XXX11
Weight
9.00 lbs
Market price:
$299.50
Our price:
$229.00
24%
Length (Inch) & Description
Qty

Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.

Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness Vertical rack heat treating controls distortion CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges

Generous transition fillet radii essential to reduction of stress risers Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress

Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress

Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers

Left Hand:

Standard KERA Left Hand Axle:

1.130” LH Diameter, Please Specify Length, Lengths Available In .250” Increments

KERA “Tuner” Left Hand Axle:

1.115” LH Diameter, Please Specify Length, Lengths Available In .250” Increments

Right Hand: (Right Hand Axle Diameter Is Determined By Left Hand Axle length & Horsepower )

Standard KERA Right Hand Axle:

1.145” RH Diameter, Please Specify Length, Lengths Available In .250” Increments

1.165” RH Diameter, Please Specify Length, Lengths Available In .250” Increments

1.180” RH Diameter, Please Specify Length, Lengths Available In .250” Increments

While left and right side axles are different lengths they are normally the same diameter; this inherently gives the right side axle a lower spring rate. This means the left side axle does not “wrap-up” as much as the right side and the car has a tendency to steer right on initial acceleration because the left rear tire sees the power first. By using a smaller diameter left hand axle with the “KERA concept” you can equalize this torque steer reaction both under acceleration or deceleration.

This Equal-Response-Reaction can be further used to specifically tune the chassis to turn left by reducing the left side axle diameter further from the standard KERA diameter split between the left and right side axles. In effect, the Kleban Equal Response Axles (KERA) can be used as a precise tuning device like that of tire stagger without having any effect on existing cross weight, spring rates, anti-roll bar, ride height or tire pressure. ALL 31 SPLINE. ALL GUN DRILLED.

Click on Link Below to see Video.

https://youtu.be/gs5jjNbSKco?list=PLtKgN6KsmqTpDyNHET8BTo060Ld6h8D57

                  USMTS    
                       
  Typical HP             750      
                         
  Typical Rear-End             QC      
                         
  Typical Axle Lengths           Varies      
                     
                         
              All Gun-Drilled Axles  
Options:                        
1 Forward Bite         L =  1.115"  
                 R = 1.130"      
                         
2 Most Throttle Turn        (a bit Loose On Exit)         L = 1.115"    
                R = 1.165"      
                         
3 Some Forward Bite & Throttle Turn         L = 1.115"    
                R = 1.145"      
                         
                         
  Here's what you can expect from the Options listed:            
                           
1 Forward Bite Using the smallest axle diameter allowable (based on HP) you will encourage both left & right axles to "wrap-up" at virtually the same rate. Maximizing axle wrap will make it more difficult for the tire to break traction on acceleration, whether it's on corner exit or on restarts. You don't have to worry about the axle breaking from twisting, the material & design is meant to twist all day without any damaging effect on the axle.                              Best Suited Track Type:   Dry-Slick                           
 
       
       
       
                           
2 Most Throttle Turn        (a bit Loose On Exit) This option is our maximum recommended offset between the left & right side axle diameters to allow for "on throttle" turn like that of adding tire stagger. The greater the diameter split between the left & right axles, the more "loose" the effect is "on throttle". Forward bite is slightly reduced to a degree (from Option #1), but the axle diameters here still remain much thinner than standard axles sold which will allow for axle "wrap-up" and increased forward bite over any standard diameter axles.                                                                                                    Best Suited Track Type:   Heavy or tacky   
 
       
       
       
                           
3 Some Forward Bite & Throttle Turn Here we utilize axle diameters that will provide a bit of both Options #1 & #2 (Forward Bite & Throttle Turn), using smaller diameters overall with a slight split between left & right side axle diameters. This options best captures a bit of axle wrap (Forward Bite) with the thinner overall axle diameters & throttle turn (the tire stagger effect) that comes with different left-to-right axle diameters. It is our most commonly used axle combination.        Best Suited Track Type:   Starts heavy or tacky and gets more dry-slick through the night  
 
       
       
       
                           

 

Send to friend

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.

Related products

$119.00

Customers also bought

UNIVERSAL AXLE PULLER
$29.90
CTS FOAM MUD PLUGS
$13.99
Gates Push-On Racing Hoses, For AN Fittings
$3.49
Aluminum Ends for Composite Rods-Ten Pack
$27.99
CTS Custom Center links
$119.95
Winters Performance STEEL 5X5 REAR HUB WITH COARSE STUDS - PLATINUM
$208.95
SPEED SECRETS THROTTLE CONTROL BAR
$49.99
Bear Bond All-Use Repair Tape - 6" x 64" Roll (Black or White)
$29.90
CTS EZ RODS
$27.99