CTS GM Metric Upper Rear Control Arm-Adjustable Metric Trailing Arms-Each
- 2% off
:
from
to
CTS GM Metric Lower Rear Control Arm-Adjustable Metric Trailing Arms-Each
SKU: ALL57826
GM Metric Upper Rear Control Arm
Adjustable steel 1978-88 G-body metric upper and lower rear end trailing arms are complete with left and right 3/4"rod ends, step spacers reducing to a 1/2"hole and cut to fit stock GM type mounts. Upper arm aids in adjusting pinion angle and centering rear end. Lower arm will adjust wheel base. This Lower Arm Position. Sold Each.
Normal stock lengths are 11 1/4" top and 19 1/4" bottom. These are made for those measurements. Can bne shorten about another 1/2" or so and lengthen about another 1" or so. Can be trimmed also off tube if he needed to be a little shorter.
Lower Arm Type | Trailing Arm |
Upper/Lower | Lower |
Lower Style | Tubular |
Application Specific | Yes |
OE Compatible | Yes |
Driver/Passenger Side | Driver | Passenger |
Adjustable Length | Yes |
Length Range Low | 19 in |
Length Range High | 20.5 in |
Spherical Rod End Included | Yes |
Spherical Rod End Material | Steel |
Bushing Style | Spherical Bearing |
Bushing Material | Steel |
Hardware Included | Yes |
Material | Steel |
Color | Gray |
Finish | Natural |
Quantity | Each |
