KEVKO CRATE 602-604 PAN EVACUATION SYSTEM-7 HORSE POWER

This kit can be used on any motor. This kit comes complete with K9039 & K9040 Slip on Fill & #12AN for 1-1/2" breather tubes, K139-1 Check Valve, K139-2 Weld in Pipe Fitting for header, 6' of #12 hose K123 & clamp, 2- straight #12AN fittings K116, 1- 90 degree #12AN fitting K117, and the K139 Evac Tank. This system mounts along the firewall and connects between the valve cover and the header. Tested by engine builders in the Midwest, this will create vacuum pressure in the crankcase, reduce windage, lower oil temps and can free up to 7 horse power! Kevko's new Pan Evacuation System is designed to be the simplest setup on the the market . Our new O-Ring Seal and Fill Cap are an industry first allowing you to convert your standard valve covers to this Evac System without any welding required. This system uses your exhaust to pull a vacuum through our air/oil separator tank, which reduces crank case pressure. The result is less windage in the crankcase, no messy breathers, and increased horsepower! The K139-Crate is designed for 1-3/8" breather tubes. and K139-Open is designed for 1-1/2" breather tubes.

 Tested by leading engine builders as one of the most efficient oil evacuation systems currently available, unit is designed to create vacuum pressure in the crankcase, reducing windage and oil temperatures, while freeing up to 7 horsepower. System mounts to the firewall and connectsto the existing stand pipes and exhaust header. Sold complete with remote breather tank and mount, evacuation valve, necessary fittings, hose, and hardware.