Available With or Without a Schrader Valve To Comply with Rules
Non Adjustable Shocks.
The GS1 is a steel mono-tube, non-adjustable gas shock absorber. It's available in 7" and 9" stroke and any possible valving or split valving. It has a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.
Features
- Large 48mm bore for maximum control.
- Positive stainless steel no-drag scraper to keep any dirt and debris out.
- Solid Carbo-Nitrided Alloy shaft.
- Low friction Teflon lined self-lubricating 1/2 inch bearing on both ends.
- The finest High quality, High viscosity index shock absorber oils.
- Double checked low-speed valving design with ± .00004" precision components.
- The GS1 is completely rebuildable - revalvable.
- Available With or Without a Schrader Valve To Comply with Rules.
The GS1 is completely rebuildable, and revalvable.
With or without Schrader Valves according to your Rules.
Series |
Extended Length |
Compressed Length |
Travel |
Weight |
GS1 - 7" |
19 3/4 |
12 3/4 |
7 inch |
#4.3 |
GS1 - 9" |
23 3/4 |
14 3/4 |
9 inch |
#4.9 |