
The GB3 is a mono - tube double adjustable base valve it's available in 5" - 6" - 7" - 8" and 9" stroke and any possible valving or split valving.
The GB3 has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
The GB3 is completely rebuildable - revalvable.
Features
The GB3 has the largest true rebound and compression range of adjustments. 3 to 8 on Rebound and Compression is standard, Also available in other ranges. Both adjustments are thru the rod.
Large 48mm bore for maximum control and reduction of rod pressure buildup.
Largest 75mm built on gas reservoir.
High strength 10 turns per inch external threads with adjusting nut locking grooves.
Positive stainless steel no-drag scraper to keep any dirt and debris out.
Hollow chrome-moly shaft.
Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
The finest high quality, high viscosity index, 100% Synthetic Shock absorber oil virtually 0 thermal expansion.
Has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
Double checked low-speed valving design.
Completely independent rebound and compression adjustment.
If more Extended length is needed as in a shock extension it MUST be ordered on shock when ordering like below
Advantages
Much more traction than standard shocks especially in slick conditions.
More driver feel which results in better feedback to adjust to ever changing track conditions.