Ball Joints

Pickle forks suck! Our remover actually works. With the nut off the ball joint you want to remove, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out

CTS BALL JOINTS-BOLT IN, SCREW IN, PRESS IN, UPPER

Able to change camber up to +3.0 degree these ball joints are perfect for lowered vehicles. For changes less than +1.5 degree check out our Adjustable Ball Joints Part No 67125.

Adjustment range: +1.50 degree to +3.00 degree.

Installation time: .8 hours

APPLICATIONS:

Acura: 1996 - 97 2.2CL, 1998 - 99 2.3CL, 1996 - 99 3.0CL, 2001 3.2CL, 1999 - 02 3.2 TL

Changeable heim style bearing. Almost no friction. Adjust roll center and camber gain.

The Mono-Ball Joint is designed to adjust the upper control arm angles. By raising and lowering your upper control arm angles, you can accurately adjust your roll center. This allows you to greatly improve the handling of your car. Complete with plate, ball, tapered shaft, adjuster bushings and nut.

• CHOOSE FOR: mid-size GM style upper control arms (Metric) OR Upper Control Arms that use K-6024 Ball Joints-Tubular Arms & Spindles. (63-70 Chevy 2WD truck).

• Specify right or left side when ordering

Moog Screw-In Ball joint – K772 

CTS BALL JOINTS-BOLT IN, SCREW IN, PRESS IN, LOWER.

A-Arm: 10 Degree Screw in Ball Joint-Slotted Shaft-Specify Steel or Aluminum

A-Arm: 10 Degree Screw in Ball Joint-Slotted Shaft-Specify Steel or Aluminum