
Package B: Consists of a pair of Super Duty Blue Printed front calipers plus Pe
Year Package A
94-99 $453.84
00-01 $476.84
Year Package A
88-93 Call
94-99 $711.84
00-02 $509.84
Year Package A
88-93 (4500#) $471.84
94-99 (4500#) $471.84
00-02 $509.84
1 Ton 3500 Series 2WD (Single and Dual Rear Wheel)
Year Package A
88-93 $525.84
94-99 (2/ABS) $977.84
00-02 $509.84
1 Ton 3500 Series 4WD (Single and Dual Rear Wheel)
Year Package A
88-89 $611.74
90-93 $579.44
94-99 $534.94
00-02 $628.54
Rotors
Gas-Slotted OEM factory sized front rotors to provide more cooling surface area and provide pad out gassing. Featuring asymmetrical and directional vent pattern to provide cooler and longer lasting rotors. Virtually eliminating glazing, warpage and stress cracking. Providing better initial bite and superior heat dissipation.
Pads & Shoes
Special Carbon Kevlar integrally molded Disc Pads and Brake Shoes. The latest technology now allows us to provide "State of the Art" Pads and Shoes! Heat cured to remove air pockets from the compressed friction material to eliminate brake noise and provide unsurpassed heat transfer. Utilizing Carbon Kevlar technology, the fiber strands in conjunction with metal particles combine to absorb vibration, a leading cause of brake noise. Allowing faster heat dissipation, a major cause of warped and stress cracked rotors. Quicker heat dissipation means less fade and less pedal pressure, which in turns results in less pad and rotor wear. The dynamic coefficient actually grips better as the temperature goes up. Our Carbon Kevlar pads and shoes provide unequaled stopping distances for heavy loads and high heat applications. And are the ultimate for heavy towing and load requirements. Available for most all vehicles and trailers as well.
TECH DATA:
DENSITY: 3.0 TO 3.2.
HARDNESS: 81.3 Rockwell.
MATERIAL: Carbon Kevlar Metallic and Ceramic
DYNAMIC COEFFICIENT: Cold application .425 increases to .485 when running at higher temperatures.
CONSTRUCTION: Utilizes ceramic inner layer between the friction material and the backing plate to reduce heat penetration to the brake fluid system.
Brake Fluid
Motul ABS 5.1 Synthetic Brake Fluid boasts extremely high boiling points: Dry 522 degrees And Wet 409 degrees, with exceptional recovery time, maintaining thermal viscosity. Virtually eliminates vapor lock and brake fade. Motul ABS 5.1 is fully miscible with synthetic brake fluids complying with SAE J1703, DOT 3,4, and 5.1, Which it can replace with out any special precautionary measures. Designed specifically for todays ABS sysytems to Flow Fast in Cold Weather environments and provides Super Quick apply response in Hot Environmants as well. Not to be used with mineral based or silicon fluids. (This is NOT Silicon Brake Fluid). Simply the best fluid available for high temperature and high performance braking systems.