CTS Extra Long Left Trailing Arm Bracket-7.5 Inch Down
- 12% off
Strange Oval Modified IMCA USTMS Axles
We deliver worldwide and to almost all countries. Call us at 704-871-0721 to get help with large international orders and we can help manually check the shipping for you. MORE INFO BELOW in Shipping Info section.
We accept returns for up to 30 days from the purchase date. To be eligible for a return, your item must be unused and in the same condition that you received it. More Return Info below.
Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness Vertical rack heat treating controls distortion CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
Generous transition fillet radii essential to reduction of stress risers Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
NEW LENGTHS & O.D'S ADDED
Product Description-UMP LEGAL
Left Hand:
Standard KERA Left Hand Axle:
1.130” LH Diameter, Please Specify Length, Lengths Available In .250” Increments
KERA “Tuner” Left Hand Axle:
1.115” LH Diameter, Please Specify Length, Lengths Available In .250” Increments
Right Hand: (Right Hand Axle Diameter Is Determined By Left Hand Axle length & Horsepower )
Standard KERA Right Hand Axle:
1.145” RH Diameter, Please Specify Length, Lengths Available In .250” Increments
1.165” RH Diameter, Please Specify Length, Lengths Available In .250” Increments
1.180” RH Diameter, Please Specify Length, Lengths Available In .250” Increments
While left and right side axles are different lengths they are normally the same diameter; this inherently gives the right side axle a lower spring rate. This means the left side axle does not “wrap-up” as much as the right side and the car has a tendency to steer right on initial acceleration because the left rear tire sees the power first. By using a smaller diameter left hand axle with the “KERA concept” you can equalize this torque steer reaction both under acceleration or deceleration.
This Equal-Response-Reaction can be further used to specifically tune the chassis to turn left by reducing the left side axle diameter further from the standard KERA diameter split between the left and right side axles. In effect, the Kleban Equal Response Axles (KERA) can be used as a precise tuning device like that of tire stagger without having any effect on existing cross weight, spring rates, anti-roll bar, ride height or tire pressure. ALL 31 SPLINE. ALL GUN DRILLED.
Click on Link Below to see Video.
https://youtu.be/gs5jjNbSKco?list=PLtKgN6KsmqTpDyNHET8BTo060Ld6h8D57
Renegade | ||||||||||||
Typical HP | 750 | |||||||||||
Typical Rear-End | QC | |||||||||||
Typical Axle Lengths | Varies | |||||||||||
All Gun-Drilled Axles | ||||||||||||
Options: | ||||||||||||
1 | Forward Bite | L = 1.115" | ||||||||||
R = 1.130" | ||||||||||||
2 | Most Throttle Turn (a bit Loose On Exit) | L = 1.115" | ||||||||||
R = 1.165" | ||||||||||||
3 | Some Forward Bite & Throttle Turn | L = 1.115" | ||||||||||
R = 1.145" | ||||||||||||
Here's what you can expect from the Options listed: | |||||||||||||
1 | Forward Bite | Using the smallest axle diameter allowable (based on HP) you will encourage both left & right axles to "wrap-up" at virtually the same rate. Maximizing axle wrap will make it more difficult for the tire to break traction on acceleration, whether it's on corner exit or on restarts. You don't have to worry about the axle breaking from twisting, the material & design is meant to twist all day without any damaging effect on the axle. Best Suited Track Type: Dry-Slick | |||||||||||
2 | Most Throttle Turn (a bit Loose On Exit) | This option is our maximum recommended offset between the left & right side axle diameters to allow for "on throttle" turn like that of adding tire stagger. The greater the diameter split between the left & right axles, the more "loose" the effect is "on throttle". Forward bite is slightly reduced to a degree (from Option #1), but the axle diameters here still remain much thinner than standard axles sold which will allow for axle "wrap-up" and increased forward bite over any standard diameter axles. Best Suited Track Type: Heavy or tacky | |||||||||||
3 | Some Forward Bite & Throttle Turn | Here we utilize axle diameters that will provide a bit of both Options #1 & #2 (Forward Bite & Throttle Turn), using smaller diameters overall with a slight split between left & right side axle diameters. This options best captures a bit of axle wrap (Forward Bite) with the thinner overall axle diameters & throttle turn (the tire stagger effect) that comes with different left-to-right axle diameters. It is our most commonly used axle combination. Best Suited Track Type: Starts heavy or tacky and gets more dry-slick through the night | |||||||||||
Products typically ship out between the same day and 1-3 days. Depending on the time/day ordered and the product type. Some products are made to order to spec and will ship once built. Feel free to call us at 704-871-0721 if you have any questions about shipping. Also call us if you are ordering large items like race car bodies as those are hard for the freight system to calculate sometimes and it will overestimate. Thank you.
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. If the return is not based on a mistake on our part, a 15% restocking fee will apply.
Several types of goods are exempt from being returned. We also do not accept products that are hazardous materials, flammable liquids, or gases.
Additional non-returnable items:
* Gift cards
* Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer. *Special cases might be returned to the manufacturer*
There are certain situations where only partial refunds are granted: (if applicable)
* Book with obvious signs of use
* Any item not in its original condition, that is damaged, or is missing parts for reasons not due to our error.
* Any item that is returned more than 30 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next, contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at glnmaurer@circletracksupply.com.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately, sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged, or if we made the mistake. If you need to exchange it for the same item, send us an email at glnmaurer@circletracksupply.com and send your item to 304 5th Creek Road, Statesville, NC, 28625, United States.
Shipping
To return your product, you should mail your product to:
CircleTrackSupply.com
304 5th Creek Road, Statesville, NC, 28625, United States.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.