Circle Track Supply, Inc. > Spindles > CTS Camaro Clip Wide 5 Spindles

Now Accepting
Search items...
0

from

Reset all filters

CTS Camaro Clip Wide 5 Spindles

SKU: CLO0114X

Ask a question (3)

CTS Camaro Clip Wide 5 Spindles

The ultimate Camaro clip wide 5 spindle. These spindles are exclusively designed and built for Camaro clip race cars. 100% jig built using DOM tubing. Choice of either GM or Superlight brake brackets. Plenty tough enough to take the abuse of 2700 lbs. stock clip race cars.

If you’ve been running late model built spindles on your Camaro clip car you’re at a huge disadvantage over these quality pieces! Available with superlite brake brackets only (3.5" c-c) and will accept either .810 or 1.250 rotors. Bolt on conversion brackets for stock big GM calipers also available.

7.5 Degree Pin Inclination.

Wide 5 Stock Clip Spindle For Camaro, Metric, Impala, Etc. Uses .810 Rotors And Superlite Or Narrow Dynalite 3.5" Bolt Pattern Calipers. Conversion Mount Available For Large GM Stock Calipers CLO 03218621

These pieces will steer you into victory lane!

- SKU
  CLO0114X
- Weight
  13.66 lbs
- Dimensions (L x W x H)
  14 x 14 x 12 inches
Manufacturer
CIRCLE TRACK SUPPLY-PERFORMANCE AND RACE PRODUCTS, CTS
SIDE OR PAIR
0114L LEFT ONLY, 0114R RIGHT ONLY, BOTH SIDES-PAIR, 0114L&R

Product questions

Jeff
Oct 10, 2024, 21:17
What is the hight of the spindle at ball joint hole top to bottom
Administrator
Oct 14, 2024, 17:11
Spindle height is 8.75"
Keep in mind the spindle pin height is different side to side because these are made for oval track racing and not some other type of racing.
This is what we install on all our stock clip type cars, once again dirt oval track application.
Mike Honcho
Apr 8, 2023, 21:16
Is the spindle height the same for left and right? And can I get a front caliper mount for the RF?
Administrator
Apr 11, 2023, 11:00
These are set up for circle track, not road racing, brake caliper brackets are attached.
Keith
Feb 17, 2023, 16:30
What is the pin inclination on these spindles and is it the same left to right
Administrator
Feb 20, 2023, 10:07
They should be around 5 degrees and both sides same inclination. The pin height is different from left to right but inclination remains same. Thank You.