Home - Rear Suspension - Torque Absorbers & Spring Loading Torque Arms - JDM Racing Pro-Series Pullbar-Aluminum – Open & UMP Motor

JDM Racing Pro-Series Pullbar-Aluminum – Open & UMP Motor

JDM Racing Pro-Series Pullbar-Aluminum – Open & UMP Motor
JDM Racing Pro-Series Pullbar-Aluminum JDM-DANDY BAR DB2 PULL BAR TORQUE ABSORBER DANDY BAR PULL BAR TORQUE ABSORBER DANDY BAR PULL BAR TORQUE ABSORBER DANDY BAR PULL BAR TORQUE ABSORBER DANDY BAR PULL BAR TORQUE ABSORBER Looks like our pullbar works well with dwarf cars also.. "First time with the Dandy Bar, put it in the winner circle" -John Chrisman A lot of pullbars going out the door today. Nick Trenchard, Mike Duncan, Justin Radcliff, Tripp Gaylord, Ryan Gaylord, Harvey Balestrini, and a couple mod lite drivers all gearing up for the 2016 season! Get on a bar that fits your needs. Different pullbar and biscuit combinations for every application. No greasing required! CALL TODAY! Get on a bar that fits your needs. Different pullbar and biscuit combinations for every application. No greasing required! CALL TODAY! JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar JDM Racing Pro-Series Pullbar
SKU
JDMPS003A
Weight
4.50 lbs
Market price:
$359.00
Our price:
$319.00
11%
ADD TUBE-ROD END-JAM NUT KIT
ADD EXTRA BISCUIT SET
Qty

The Aluminum Pro Series Bar is now avialable. CTS has the New Aluminum bar now in stock. It is a 2 way true 3 stage progressive biscuit bar. 3 biscuits on acceleration side and 2 on dampening. Pull range is 500lbs at 1/4"of preload to 4000 lbs at 1.5" of travel. Overall length from center of heim to end of shaft is 16.5". Only 2"in diameter The first true 3 stage progressive pull bar to hit the market. Using small diameter, quick reacting bushings, and the dandy bar gets you out of the turns harder than any other bar. Because the biscuits are in an enclosed housing, it vastly reduces expansion, stretching, and cracking of biscuits, allowing you to run 15-25 nights on one set. The acceleration and braking sides are both pre-loaded against each other at the same rates to make for a smooth transition on and off the gas without the need of a 90/10 shock. Legal for both UMP and IMCA Late Models or Modifieds. Biscuits enclosed in housing making excessive wear and stretching on the biscuits impossible. It will eliminate all the weight and expense of the lift arm, 5th and 6th coil and wrap-up shock. One handed pinion angle adjustment. Adjustable preload. Will get you quicker and firmer response on acceleration and breaking. For faster corner exit and much higher speed corner entry with consistent handling and traction throughout. Completely CNC machined. .      ***Recommended for Open & UMP Motor

3/4-16" Male RH Thread

Chrome Plated

- Lightweight

 *aluminum - 4.5lbs

- Longer biscuit life

- no greasing required

- Easy to adjust preload

- biscuit combinations for every application 

- customer support second to none

Get on a bar that fits your needs.
Different pullbar and biscuit combinations for every application.
No greasing required!
CALL TODAY!

Preload startup and adjustment instructions

Remove threaded cup with heim. With a 1 1/8 socket and ratchet hold threaded shaft in place. On the other end snug preload retainer to the end of the spring/biscuit, then measure remaining threaded rod. With adjustable spanner wrench turn preload retainer until the exposed threaded rod is 1/4 into 3/8in of and inch longer. You will have 1/4into 3/8in preload. Slide shaft lock into keyway on the threaded rod and into 3/16 hole on the end of the housing. Tighten jam nut and replace the threaded cap with heim. Tighten cap with spanner wrench, using the 3/8in through hole to slide a screwdriver through to hold housing in place. While you tighten the cap leave jam nut loose on heim until pullbar is installed on the car and then spin pullbar to acquire your desired pinion angle. Lock down jam nuts. You are now ready to race.

EXTRA BISCUIT SETS AVIALABLE.

JDMRB103 (biscuit kit/crate motor)

JDMRB104 (biscuit kit/open motor)

Aluminum pullbar weight - 4lbs

Diameter - 2.125"

Shortest length (mounted in car)(eye to eye) - 19.0" w/ female hiem on 1 end.

16 3/4 from center of heim to end of shaft. (out of car) (hiem on body end) 

A DB2 Dandy Bar would take an 6" tube p/n 100-T306 Hex Tube & p/n 167CML12 Rod End & p/n100-7023L Jam Nut Kit 

Our DB2 pullbar is designed for every sanctioning body.  from imca mods running hoosier G60's with crate motors, to UMP mods with soft tires and open motors.  We simply adjust the travel and rates to accommodate each driver & car.

The biscuit lifespan of the DB2 bar is 10+ nights, depending on track surface and conditions.  we guarantee our biscuits for 3 nights of racing. 

  Aside from occasional biscuit changes, our pullbars are maintenance free; no greasing required.  instead of having a metal to metal contact inside the housing that would need greased nightly, we use press-in nylon bushings in our aluminum bars, and an oilite bronze bushing in our steel bars. 

Please let us know in Comments Box which sanction body your running in, and what type of engine they are running.  This way we can further assure your customer satisfaction.

SPECIFY CRATE OR OPEN MOTOR FOR BISCUIT PACK

As Used by Beakbuilt Racecars

Buck S.  July 12 at 6:30pm

Picked up a win @ east Lincoln, NC. Last sat night using that JDM pull bar. Thx been working great.

Chad E. February 5, 2015

5starFirst year with a dandy bar we won three championships & 19th in the nation!! I recommend this bar to all my friends and customers!!!

Mr. Duncan June 9, 2014

5starWe have won five races already this season on the dandy bar and I contribute allot to having all the traction we need. Thanks jdm you guys are on top of things.

Our product success speaks for itself!

“Thank you guys for getting those parts to me, put it in the car and won a $5000 to win race! Thanks again” -Jim Moody

“I raced the car 2 times and struggled. I put the dandy bar in and won three in a row. Undefeated with a D bar!” -Mark Wauge

“4th time in my new car I won my first Modified A main. Makes great smooth traction, I highly recommend this D Bar.”  -Andy Freeman

“First year with a dandy bar we won three championships & 19th in the nation!! I recommend this bar to all my friends and customers!”     -Chad Evans

“Awesome product super nice folks to work with. Thank you.”   -Chris Ross                                                                                                                             

“We have won five races already this season on the dandy bar and I contribute a lot to having all the traction we need, thanks jdm you guys are on top of things”       -Donna Duncan                                                                                                                                                    

“Absolutely the best product and customer service.  Highly recommend JDM SOLUTIONS Dandy bar. Brock is first class and extremly knowledgeable. Thanks for everything.”    Harvey Balestrini Jr.        

Get more life out of your bushings and consider our PRO SERIES PULLBAR. Tons of bushing options to tune the car for different tires, engines, and right feet.

Also, don't forget to check out our new QUICK ADJUST PUCKS that allow you to move the pullbar side-to-side on the rear end without the need of a single tool for only $74.99

                                                                                                                      

 

Send to friend

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.

Related products

JDM REPLACEMENT BUSHING KITS
$65.00
CTS QUICK ADJUST PUCKS FOR PULL BARS
$74.99
CTS Quick Change Pull Bar Mounts
$89.95

Customers also bought

INTERCOMP DELUXE GLOW and Or LIQUID FILLED 2.5" TIRE PRESSURE GAUGE
$49.99
CTS Drive shaft Safety Loop
$29.99
Integra Shock Extension Adjustable and Non Adjustable
$36.99
XS Power Batteries D1600 - XS Power AGM Batteries
$299.99
STEEL BRAIDED CLUTCH LINE
$24.99
$164.00
$2185.00
KSE Tandem Mounting Kit - Direct Head Mount
$79.99