Home - GM Crate Motor Parts and Kits - 602 CRATE ENGINES/MOTORS & PARTS - CTS 602 Crate Cheater Head & Cam Shaft with "Under Cover Porting"-Port and Regrind Special

CTS 602 Crate Cheater Head & Cam Shaft with "Under Cover Porting"-Port and Regrind Special

CTS 602 Crate Cheater Head & Cam Shaft with "Under Cover Porting"-Port and Regrind Special
CTS 602 Crate Head with "Under Cover Porting" CTS Undercover Ported Heads will add 14 horsepower & 18 ft. lbs. of torque CTS 602 Crate Cheater Head & Cam Shaft with "Under Cover Porting"-Port and Regrind Special CTS 602 Crate Cheater Head & Cam Shaft with "Under Cover Porting"-Port and Regrind Special CTS Look-A-Like intake valves for the ‘602 & ‘603 Crate Motor CTS GM 602 CRATE CHEATER SPRINGS Single Outer Valve Spring Set CTS 602 CRATE CHEATER Valve Spring Retainers CTS 602 CHEATER VALVE KEEPER LOCKS-"LOOK-A-LIKE"
SKU
CTSUCHPAK602
Weight
80.00 lbs
Market price:
$2195.00
Our price:
$1995.00
9%
Qty

 How to Add 36 Horsepower to your ‘602 Crate Motor!-We will modify YOUR complete ‘602 cylinder heads and regrind YOUR camshaft-

  • Disassemble and clean YOUR ‘602 cylinder heads
  • “UnderCover Porting” modifications to intake ports, exhaust ports, and chambers.
  • Hone the valve guides to correct clearances.
  • Machine a flow bench developed valve job.
  • Surface the heads to the original cc’s, or smaller if you want.
  • New Look-a-Like intake valves that flow better than the Chevy intake valve.
  • New Look-a-Like valve springs that will not lose spring pressure like the Chevy springs.
  • New Look-a-Like retainers that will not break.
  • New Look-a-Like machined valve locks. Not stamped like the stock Chevy locks.
  • Reassemble with original Chevrolet valve seals.
  • Regrind YOUR ‘602 camshaft.
  • Add 36 Horsepower to your ‘602 Crate Motor - Feel the Need for Speed!! The stock ‘602 Crate engine produced 349 horsepower @ 6,000 rpm. With our CTS “Under Cover Ported” heads the same motor made 363 horsepower @ 6,000 rpm. Torque also increased 18 ft. lbs at 5,500 rpm. Next, our CTS Crate Master Cheater Camshaft was installed. With our Crate Master camshaft the motor made 385 horsepower @ 6,000 rpm. Torque increased another 9 ft. lbs at 6,000 rpm. The combination of CTS “Undercover Ported” heads and CTS Crate Master Camshaft improved the motor 36 horsepower and 31 ft. lbs of torque. CTS 602 crate head with "Under Cover Porting" “Undercover Porting” will add 14 horsepower & 18 ft. lbs. of torque. With our CTS Crate Master Camshaft, the improvement is 36 horsepower & 31 ft. lbs. of torque. The ‘602 crate motor has “Mexican” style Vortec cast iron heads. Of the several different styles of Vortec heads Chevrolet produced, the “Mexican” head is by far the worst flowing. However, they do respond to our “Undercover Porting” procedures. We Regrind your heads and cam and then the CTS Under Cover Ported” heads are re-assembled with our Look-a-Like parts. (Valve springs, retainers, locks and intake valves). Ready to bolt on. Bulletproof your ‘602 Crate Motor. We Install our CTS “Look-A-Like” Intake valves, springs, retainers and locks and you will not have to worry about valve float again.
  • Bulletproof your ‘602 Crate Motor Valve Train

    Every racer who runs a ‘602 crate knows the valve train, especially the valve springs, are a real problem. The stock valve springs are too weak for circle track applications.

    On the ‘602 crate motor, we are concerned about the valve spring pressure, or lack there of, on the intake valve. Why the intake valve and not the exhaust? Well, the intake valve is heaver and will “float” before the exhaust. Anything you can do to increase the effective valve spring pressure will help keep the intake valves out of this destructive “float” condition. The “intake valve float” condition is problematic because the stock Chevy ‘602 valve springs suck, especially if you are trying to run the motor over 5,800 rpm.

    We Install our “Look-A-Like” valve springs, retainers and locks and you will not have to worry about valve float again.

Yes, we can rework your new or used ‘602 crate heads. Sending your heads to us has never been easier! If you don’t have good head boxes, we will send you some. If you do not have a place to ship them, we will send UPS to pick them up. Call us first before shipping your parts.

 

 

Send to friend

: *
: *
: *
 

Related products

Customers also bought

SPARK PLUG VIEWER
$59.95
WATER TEMP SENDER 230 DEGREE 3/8 NPT
$18.95
B168L Super Sixteen Lithium Battery 16v
$1899.99
Longacre AccuTech SMi Oil Pressure Gauge - 0-100 psi — 46540
$118.95
Wehrs GRAND NATIONAL HUB DUST CAP
$15.99
CTS UMP LOWER CONTROL ARMS-CHEVLLE
$179.95
QuickCar Extreme Water Temp Gauge- Color Changing Gauges
$84.95
$119.95